Restoration and complete renewal of garden paths

Restoration and complete renewal of garden paths

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Garden paths in the country are not only high-quality marking of the site and its original decoration, but also the main canvas for moving around the territory, and this is the most important destination. But it often happens that after winter, updating this element of the landscape is required.

Yes, it is precisely after a frosty winter and snow melts that we find cracks and chips, more serious defects and breakdowns that push us to immediate repair at many dacha facilities. And this is very correct, because if the shed with a small crack in the wall can suffer several weeks, then the paths should be updated immediately, since it is easy to get injured on a poor-quality surface.

Today we want to tell how to quickly and cheaply update and restore the paths in the countrythat have become unusable due to long time of use, or for other reasons.

Inexpensive replacement

If the old canvas wears out, is cracked and interferes with the safe movement of the territory, sometimes it is more advisable to completely change it.

An inexpensive replacement can be standard concrete slabs, which can be purchased at construction sites or poured out of solution on their own. Concrete slabs for country paths serve for a long time when properly placed on the site, and they look very good if, for example, they are decorated with plants on the sides, a lawn is laid along the path, and so on.

You can lay concrete slabs on the ground, or you can make the right pillow of rubble, screenings and sand, creating a certain drainage layer. Filling takes place in a self-created form. If there are ready-made slabs, it remains only to make laying according to the marking and to repair the seams, perhaps, to plant lawn grass in the seams.

Stone Update

Stone paths in the country - an expensive pleasure that not everyone can afford. And therefore, if you nevertheless decided, and have already spent time on laying, then the tracks should be properly taken care of so that their service life lasts as long as possible.

Updating this landscape element in the spring is a fairly simple task, but only in the case of a more or less normal state. If winter frosts and the scorching sun, as well as spring streams spoil the base and surface, serious work remains.

Broken stone and the most defective parts must be replaced completely. It is advisable to remove such pieces from a common canvas, lay a new embankment under them and lay a new stone in place. The joints between the stone will need to be filled with the same material as before. Perhaps it was a cement-sand mortar, sand, dry cement or other materials.

Be sure to take care of all the damaged parts of the stone path, as further breaks are concentrated in such places. They are possible due to the redistribution of load on the surface, stagnation of water, dirt.

If the track is generally old and requires major repairs, it is much easier to replace it completely, applying the knowledge and imagination already gained. You can easily lay a new stone in the right direction on the site, use decorative elements and get new views in the landscape design of the cottage.

Lawn Track Updates

Lawns are a bright background of the entire country territory, and it is very unpleasant when they are “cut” by low-quality paths (namely, here they suffer most). An improperly organized path on the lawn can accumulate moisture, collapse due to washouts and other problems, and therefore it is precisely on them that special attention should be paid.

But, which cannot but rejoice, updating lawn paths is considered the easiest. Here you can draw almost any picture with a stone, laying it out even in intricate patterns that do not look very natural in other areas of the site.

The stone can be laid new and not quite, intertwined with green areas, decorate part of the trail with other elements, creating original combinations.

But if you have the opportunity, it is better to use a new natural stone for restoration. To lay it, it will be necessary to remove part of the lawn, lay a drainage pillow, compact the material in the prepared area, grass joints and seams. As a result of a rather interesting process, you can not only update the site element, but also completely redesign the landscape.

Pros of combined materials

Many prudent summer residents immediately build decorative combined paths, which are based on the laying of a variety of materials. Thus, on the same plane one can observe different types of stone, concrete, gravel, and even brick. In this case, if in the spring it will be necessary to replace some parts, then it will not be so difficult. It is only necessary to use the material that is available. Buy a new brick or stone will not have to.

The positive side is the fact that any pothole or low-quality material can be replaced with a small slab of concrete. To do this, it is enough to remove the defective part, clean the fill zone, make a pillow and install the formwork in the form that is most suitable for the design. Next, just fill the openings with a solution and give it a little time to dry. After pouring, the formwork is removed, and the seams are rubbed with sand, dry cement, or green grass is planted in them.

Forms for tracks or complete blade replacement

For the formation or restoration of paths it is very convenient to use special formswhich abound today on sale. Dimensions, drawing, relief and other parameters can always be chosen at your own discretion, and then build tracks according to a simplified scheme.

Both in laying new and in restoration of old tracks one technology is used. You make markings, prepare the surface, arrange sprinkling and prepare a cement-sand mortar for pouring. Only now you do not need to think about formwork and try to draw a shape yourself, it is already completely ready. Set the form at the beginning of the future trail, pour it with a solution, let the solution dry a little, remove the form and continue production.

When the concrete tracks are completely dry, it will be necessary to fill the seams with screenings, sand, and plant grass.

Bulk repair and updating of tracks

Absolutely any coating can be replaced with bulk, which will absorb and drain water well, remain dry and reliable, complement the landscape of the cottage and serve the maximum time.

If the asphalt, concrete or stone walkway in the country has worn out, you can organize a simple restoration with virtually no cost. All you need is a certain amount of material. It can be crushed stone, granite crumb, expanded clay or even sand.

Make markings on the territory, or simply on the borders of the old path that you are restoring, remove a certain layer, about 12-15 cm, so that the future track is flush with the rest of the territory, and pour material, tamping it well. Further, the borders can be laid with stone or brick for decoration and embankment restrictions.

The result of simple work is an excellent solution for a summer residence - a bulk path that will last for many years without any problems.

Restoration and production of country paths (video)

Updating tracks in the country can occur in other ways.using other materials and technologies, which we will definitely talk about. Today we examined the fastest, most practical and inexpensive methods of replacing and restoring the canvas, and now we want to hear your opinion about the article.

Video, Sitemap-Video, Sitemap-Videos